TensorFlow - Installation

 

TensorFlow - Installation

Installation

General Remarks

In contrast to TensorFlow 1.x, where different Python packages needed to be installed for one to run TensorFlow on either their CPU or GPU (namely tensorflow and tensorflow-gpu), TensorFlow 2.x only requires that the tensorflow package is installed and automatically checks to see if a GPU can be successfully registered.

Anaconda Python 3.8 (Optional)

Although having Anaconda is not a requirement in order to install and use TensorFlow, I suggest doing so, due to it’s intuitive way of managing packages and setting up new virtual environments. Anaconda is a pretty useful tool, not only for working with TensorFlow, but in general for anyone working in Python, so if you haven’t had a chance to work with it, now is a good chance.

Install Anaconda Python 3.8


  • Go to https://www.anaconda.com/products/individual and click the “Download” button

  • Download the Python 3.8 64-Bit Graphical Installer or the 32-Bit Graphical Installer installer, per your system requirements

  • Run the downloaded executable (.exe) file to begin the installation. See here for more details

  • (Optional) In the next step, check the box “Add Anaconda3 to my PATH environment variable”. This will make Anaconda your default Python distribution, which should ensure that you have the same default Python distribution across all editors.

Create a new Anaconda virtual environment

  • Open a new Terminal window

  • Type the following command:

    conda create -n tensorflow pip python=3.9

  • The above will create a new virtual environment with name tensorflow

Important

The term Terminal will be used to refer to the Terminal of your choice (e.g. Command Prompt, Powershell, etc.)

Activate the Anaconda virtual environment

  • Activating the newly created virtual environment is achieved by running the following in the Terminal window:

    conda activate tensorflow

  • Once you have activated your virtual environment, the name of the environment should be displayed within brackets at the beggining of your cmd path specifier, e.g.:

    (tensorflow) C:\Users\sglvladi>

Important

Throughout the rest of the tutorial, execution of any commands in a Terminal window should be done after the Anaconda virtual environment has been activated!

TensorFlow Installation

Getting setup with an installation of TensorFlow can be done in 3 simple steps.

Install the TensorFlow PIP package

  • Run the following command in a Terminal window:

    pip install --ignore-installed --upgrade tensorflow==2.5.0

Verify your Installation

  • Run the following command in a Terminal window:

    python -c "import tensorflow as tf;print(tf.reduce_sum(tf.random.normal([1000, 1000])))"

  • Once the above is run, you should see a print-out similar to the one bellow:

    2020-06-22 19:20:32.614181: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cudart64_101.dll'; dlerror: cudart64_101.dll not found
2020-06-22 19:20:32.620571: I tensorflow/stream_executor/cuda/cudart_stub.cc:29] Ignore above cudart dlerror if you do not have a GPU set up on your machine.
2020-06-22 19:20:35.027232: I tensorflow/stream_executor/platform/default/dso_loader.cc:44] Successfully opened dynamic library nvcuda.dll
2020-06-22 19:20:35.060549: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1561] Found device 0 with properties:
pciBusID: 0000:02:00.0 name: GeForce GTX 1070 Ti computeCapability: 6.1
coreClock: 1.683GHz coreCount: 19 deviceMemorySize: 8.00GiB deviceMemoryBandwidth: 238.66GiB/s
2020-06-22 19:20:35.074967: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cudart64_101.dll'; dlerror: cudart64_101.dll not found
2020-06-22 19:20:35.084458: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cublas64_10.dll'; dlerror: cublas64_10.dll not found
2020-06-22 19:20:35.094112: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cufft64_10.dll'; dlerror: cufft64_10.dll not found
2020-06-22 19:20:35.103571: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'curand64_10.dll'; dlerror: curand64_10.dll not found
2020-06-22 19:20:35.113102: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cusolver64_10.dll'; dlerror: cusolver64_10.dll not found
2020-06-22 19:20:35.123242: W tensorflow/stream_executor/platform/default/dso_loader.cc:55] Could not load dynamic library 'cusparse64_10.dll'; dlerror: cusparse64_10.dll not found
2020-06-22 19:20:35.140987: I tensorflow/stream_executor/platform/default/dso_loader.cc:44] Successfully opened dynamic library cudnn64_7.dll
2020-06-22 19:20:35.146285: W tensorflow/core/common_runtime/gpu/gpu_device.cc:1598] Cannot dlopen some GPU libraries. Please make sure the missing libraries mentioned above are installed properly if you would like to use GPU. Follow the guide at https://www.tensorflow.org/install/gpu for how to download and setup the required libraries for your platform.
Skipping registering GPU devices...
2020-06-22 19:20:35.162173: I tensorflow/core/platform/cpu_feature_guard.cc:143] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX2
2020-06-22 19:20:35.178588: I tensorflow/compiler/xla/service/service.cc:168] XLA service 0x15140db6390 initialized for platform Host (this does not guarantee that XLA will be used). Devices:
2020-06-22 19:20:35.185082: I tensorflow/compiler/xla/service/service.cc:176]   StreamExecutor device (0): Host, Default Version
2020-06-22 19:20:35.191117: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1102] Device interconnect StreamExecutor with strength 1 edge matrix:
2020-06-22 19:20:35.196815: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1108]
tf.Tensor(1620.5817, shape=(), dtype=float32)

GPU Support (Optional)

Although using a GPU to run TensorFlow is not necessary, the computational gains are substantial. Therefore, if your machine is equipped with a compatible CUDA-enabled GPU, it is recommended that you follow the steps listed below to install the relevant libraries necessary to enable TensorFlow to make use of your GPU.

By default, when TensorFlow is run it will attempt to register compatible GPU devices. If this fails, TensorFlow will resort to running on the platform’s CPU. This can also be observed in the printout shown in the previous section, under the “Verify the install” bullet-point, where there are a number of messages which report missing library files (e.g. Could not load dynamic library 'cudart64_101.dll'; dlerror: cudart64_101.dll not found).

In order for TensorFlow to run on your GPU, the following requirements must be met:

Prerequisites

Nvidia GPU (GTX 650 or newer)

CUDA Toolkit v11.2

CuDNN 8.1.0

Install CUDA Toolkit

  • Follow this link to download and install CUDA Toolkit 11.2

  • Installation instructions can be found here

Install CUDNN

Environment Setup

  • Go to Start and Search “environment variables”

  • Click “Edit the system environment variables”. This should open the “System Properties” window

  • In the opened window, click the “Environment Variables…” button to open the “Environment Variables” window.

  • Under “System variables”, search for and click on the Path system variable, then click “Edit…”

  • Add the following paths, then click “OK” to save the changes:

    • <INSTALL_PATH>\NVIDIA GPU Computing Toolkit\CUDA\v11.2\bin

    • <INSTALL_PATH>\NVIDIA GPU Computing Toolkit\CUDA\v11.2\libnvvp

    • <INSTALL_PATH>\NVIDIA GPU Computing Toolkit\CUDA\v11.2\include

    • <INSTALL_PATH>\NVIDIA GPU Computing Toolkit\CUDA\v11.2\extras\CUPTI\lib64

    • <INSTALL_PATH>\NVIDIA GPU Computing Toolkit\CUDA\v11.2\cuda\bin

Update your GPU drivers (Optional)

If during the installation of the CUDA Toolkit (see Install CUDA Toolkit) you selected the Express Installation option, then your GPU drivers will have been overwritten by those that come bundled with the CUDA toolkit. These drivers are typically NOT the latest drivers and, thus, you may wish to update your drivers.

Verify the installation

  • Run the following command in a NEW Terminal window:

    python -c "import tensorflow as tf;print(tf.reduce_sum(tf.random.normal([1000, 1000])))"

    Important

    A new terminal window must be opened for the changes to the Environmental variables to take effect!!

  • Once the above is run, you should see a print-out similar to the one bellow:

    2021-06-08 18:28:38.452128: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cudart64_110.dll
2021-06-08 18:28:40.948968: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library nvcuda.dll
2021-06-08 18:28:40.973992: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1733] Found device 0 with properties:
pciBusID: 0000:02:00.0 name: GeForce GTX 1070 Ti computeCapability: 6.1
coreClock: 1.683GHz coreCount: 19 deviceMemorySize: 8.00GiB deviceMemoryBandwidth: 238.66GiB/s
2021-06-08 18:28:40.974115: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cudart64_110.dll
2021-06-08 18:28:40.982483: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cublas64_11.dll
2021-06-08 18:28:40.982588: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cublasLt64_11.dll
2021-06-08 18:28:40.986795: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cufft64_10.dll
2021-06-08 18:28:40.988451: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library curand64_10.dll
2021-06-08 18:28:40.994115: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cusolver64_11.dll
2021-06-08 18:28:40.998408: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cusparse64_11.dll
2021-06-08 18:28:41.000573: I tensorflow/stream_executor/platform/default/dso_loader.cc:53] Successfully opened dynamic library cudnn64_8.dll
2021-06-08 18:28:41.001094: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1871] Adding visible gpu devices: 0
2021-06-08 18:28:41.001651: I tensorflow/core/platform/cpu_feature_guard.cc:142] This TensorFlow binary is optimized with oneAPI Deep Neural Network Library (oneDNN) to use the following CPU instructions in performance-critical operations:  AVX AVX2
To enable them in other operations, rebuild TensorFlow with the appropriate compiler flags.
2021-06-08 18:28:41.003095: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1733] Found device 0 with properties:
pciBusID: 0000:02:00.0 name: GeForce GTX 1070 Ti computeCapability: 6.1
coreClock: 1.683GHz coreCount: 19 deviceMemorySize: 8.00GiB deviceMemoryBandwidth: 238.66GiB/s
2021-06-08 18:28:41.003244: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1871] Adding visible gpu devices: 0
2021-06-08 18:28:42.072538: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1258] Device interconnect StreamExecutor with strength 1 edge matrix:
2021-06-08 18:28:42.072630: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1264]      0
2021-06-08 18:28:42.072886: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1277] 0:   N
2021-06-08 18:28:42.075566: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1418] Created TensorFlow device (/job:localhost/replica:0/task:0/device:GPU:0 with 6613 MB memory) -> physical GPU (device: 0, name: GeForce GTX 1070 Ti, pci bus id: 0000:02:00.0, compute capability: 6.1)
tf.Tensor(641.5694, shape=(), dtype=float32)

  • Notice from the lines highlighted above that the library files are now Successfully opened and a debugging message is presented to confirm that TensorFlow has successfully Created TensorFlow device.

TensorFlow Object Detection API Installation

Now that you have installed TensorFlow, it is time to install the TensorFlow Object Detection API.

Downloading the TensorFlow Model Garden

  • Create a new folder under a path of your choice and name it TensorFlow. (e.g. C:\Users\sglvladi\Documents\TensorFlow).

  • From your Terminal cd into the TensorFlow directory.

  • To download the models you can either use Git to clone the TensorFlow Models repository inside the TensorFlow folder, or you can simply download it as a ZIP and extract its contents inside the TensorFlow folder. To keep things consistent, in the latter case you will have to rename the extracted folder models-master to models.

  • You should now have a single folder named models under your TensorFlow folder, which contains another 4 folders as such:

TensorFlow/
└─ models/
   ├─ community/
   ├─ official/
   ├─ orbit/
   ├─ research/
   └── ...

Protobuf Installation/Compilation

The Tensorflow Object Detection API uses Protobufs to configure model and training parameters. Before the framework can be used, the Protobuf libraries must be downloaded and compiled.

This should be done as follows:

  • Head to the protoc releases page

  • Download the latest protoc-*-*.zip release (e.g. protoc-3.12.3-win64.zip for 64-bit Windows)

  • Extract the contents of the downloaded protoc-*-*.zip in a directory <PATH_TO_PB> of your choice (e.g. C:\Program Files\Google Protobuf)

  • Add <PATH_TO_PB>\bin to your Path environment variable (see Environment Setup)

  • In a new Terminal 1, cd into TensorFlow/models/research/ directory and run the following command:

    # From within TensorFlow/models/research/
protoc object_detection/protos/*.proto --python_out=.

Important

If you are on Windows and using Protobuf 3.5 or later, the multi-file selection wildcard (i.e *.proto) may not work but you can do one of the following:

# From within TensorFlow/models/research/
Get-ChildItem object_detection/protos/*.proto | foreach {protoc "object_detection/protos/$($_.Name)" --python_out=.}
1

NOTE: You MUST open a new Terminal for the changes in the environment variables to take effect.

COCO API installation

As of TensorFlow 2.x, the pycocotools package is listed as a dependency of the Object Detection API. Ideally, this package should get installed when installing the Object Detection API as documented in the Install the Object Detection API section below, however the installation can fail for various reasons and therefore it is simpler to just install the package beforehand, in which case later installation will be skipped.

Run the following command to install pycocotools with Windows support:

pip install cython
pip install git+https://github.com/philferriere/cocoapi.git#subdirectory=PythonAPI

Note that, according to the package’s instructions, Visual C++ 2015 build tools must be installed and on your path. If they are not, make sure to install them from here.

Note

The default metrics are based on those used in Pascal VOC evaluation.

  • To use the COCO object detection metrics add metrics_set: "coco_detection_metrics" to the eval_config message in the config file.

  • To use the COCO instance segmentation metrics add metrics_set: "coco_mask_metrics" to the eval_config message in the config file.

Install the Object Detection API

Installation of the Object Detection API is achieved by installing the object_detection package. This is done by running the following commands from within Tensorflow\models\research:

# From within TensorFlow/models/research/
cp object_detection/packages/tf2/setup.py .
python -m pip install --use-feature=2020-resolver .

Note

During the above installation, you may observe the following error:

ERROR: Command errored out with exit status 1:
     command: 'C:\Users\sglvladi\Anaconda3\envs\tf2\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\sglvladi\\AppData\\Local\\Temp\\pip-install-yn46ecei\\pycocotools\\setup.py'"'"'; __file__='"'"'C:\\Users\\sglvladi\\AppData\\Local\\Temp\\pip-install-yn46ecei\\pycocotools\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sglvladi\AppData\Local\Temp\pip-record-wpn7b6qo\install-record.txt' --single-version-externally-managed --compile --install-headers 'C:\Users\sglvladi\Anaconda3\envs\tf2\Include\pycocotools'
         cwd: C:\Users\sglvladi\AppData\Local\Temp\pip-install-yn46ecei\pycocotools\
    Complete output (14 lines):
    running install
    running build
    running build_py
    creating build
    creating build\lib.win-amd64-3.8
    creating build\lib.win-amd64-3.8\pycocotools
    copying pycocotools\coco.py -> build\lib.win-amd64-3.8\pycocotools
    copying pycocotools\cocoeval.py -> build\lib.win-amd64-3.8\pycocotools
    copying pycocotools\mask.py -> build\lib.win-amd64-3.8\pycocotools
    copying pycocotools\__init__.py -> build\lib.win-amd64-3.8\pycocotools
    running build_ext
    skipping 'pycocotools\_mask.c' Cython extension (up-to-date)
    building 'pycocotools._mask' extension
    error: Microsoft Visual C++ 14.0 is required. Get it with "Build Tools for Visual Studio": https://visualstudio.microsoft.com/downloads/
    ----------------------------------------
ERROR: Command errored out with exit status 1: 'C:\Users\sglvladi\Anaconda3\envs\tf2\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\sglvladi\\AppData\\Local\\Temp\\pip-install-yn46ecei\\pycocotools\\setup.py'"'"'; __file__='"'"'C:\\Users\\sglvladi\\AppData\\Local\\Temp\\pip-install-yn46ecei\\pycocotools\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sglvladi\AppData\Local\Temp\pip-record-wpn7b6qo\install-record.txt' --single-version-externally-managed --compile --install-headers 'C:\Users\sglvladi\Anaconda3\envs\tf2\Include\pycocotools' Check the logs for full command output.

This is caused because installation of the pycocotools package has failed. To fix this have a look at the COCO API installation section and rerun the above commands.

Test your Installation

To test the installation, run the following command from within Tensorflow\models\research:

# From within TensorFlow/models/research/
python object_detection/builders/model_builder_tf2_test.py

Once the above is run, allow some time for the test to complete and once done you should observe a printout similar to the one below:

...
[       OK ] ModelBuilderTF2Test.test_create_ssd_models_from_config
[ RUN      ] ModelBuilderTF2Test.test_invalid_faster_rcnn_batchnorm_update
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_invalid_faster_rcnn_batchnorm_update): 0.0s
I0608 18:49:13.183754 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_invalid_faster_rcnn_batchnorm_update): 0.0s
[       OK ] ModelBuilderTF2Test.test_invalid_faster_rcnn_batchnorm_update
[ RUN      ] ModelBuilderTF2Test.test_invalid_first_stage_nms_iou_threshold
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_invalid_first_stage_nms_iou_threshold): 0.0s
I0608 18:49:13.186750 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_invalid_first_stage_nms_iou_threshold): 0.0s
[       OK ] ModelBuilderTF2Test.test_invalid_first_stage_nms_iou_threshold
[ RUN      ] ModelBuilderTF2Test.test_invalid_model_config_proto
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_invalid_model_config_proto): 0.0s
I0608 18:49:13.188250 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_invalid_model_config_proto): 0.0s
[       OK ] ModelBuilderTF2Test.test_invalid_model_config_proto
[ RUN      ] ModelBuilderTF2Test.test_invalid_second_stage_batch_size
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_invalid_second_stage_batch_size): 0.0s
I0608 18:49:13.190746 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_invalid_second_stage_batch_size): 0.0s
[       OK ] ModelBuilderTF2Test.test_invalid_second_stage_batch_size
[ RUN      ] ModelBuilderTF2Test.test_session
[  SKIPPED ] ModelBuilderTF2Test.test_session
[ RUN      ] ModelBuilderTF2Test.test_unknown_faster_rcnn_feature_extractor
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_unknown_faster_rcnn_feature_extractor): 0.0s
I0608 18:49:13.193742 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_unknown_faster_rcnn_feature_extractor): 0.0s
[       OK ] ModelBuilderTF2Test.test_unknown_faster_rcnn_feature_extractor
[ RUN      ] ModelBuilderTF2Test.test_unknown_meta_architecture
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_unknown_meta_architecture): 0.0s
I0608 18:49:13.195241 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_unknown_meta_architecture): 0.0s
[       OK ] ModelBuilderTF2Test.test_unknown_meta_architecture
[ RUN      ] ModelBuilderTF2Test.test_unknown_ssd_feature_extractor
INFO:tensorflow:time(__main__.ModelBuilderTF2Test.test_unknown_ssd_feature_extractor): 0.0s
I0608 18:49:13.197239 29296 test_util.py:2102] time(__main__.ModelBuilderTF2Test.test_unknown_ssd_feature_extractor): 0.0s
[       OK ] ModelBuilderTF2Test.test_unknown_ssd_feature_extractor
----------------------------------------------------------------------
Ran 24 tests in 29.980s

OK (skipped=1)

Try out now 

Tags

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)